It is possible to control DiCE LIGHT by means of a "gesture", that is, simple movements of the hand without having to physically touch the device. Each gesture has a specific function, below we list those available.


DiCE LIGHT recognizes the passage of the hand a few cm from the surface following its midline. Recognition of the gesture is both ways.

Used to browse the different functions enabled on the device.


Circular movement of the hand clockwise and counterclockwise at about half the height of the device.

Used to increase (clockwise) or decrease (anticlockwise) the brightness of the DiCE LIGHT.

To ensure optimal recognition of the gesture, it is advisable to enter the field of DiCE Light from above.

VOLO (1)

Recognition of the positioning of the hand placed over the device from 1 to 10 cm from the cap. When the hand touches the cap, it is possible to "go down" inside by closing the fingers on the cap up to about 4 cm below the "tip".

Used for the choice of colors in the functions that allow it.

VOLO (2)

Recognition of the hand stopped above the device in the range between 0 and 10 cm for a period of 2 seconds.

Used to lock / unlock the color selected in the functions that allow it.


Hand detection on the surface.

Used to switch off the device or switch from maximum to minimum brightness, in the functions that allow it.